Garage floor recoat and refresh that restores a dull, scuffed or lightly worn coated floor with cleaning, screening and a fresh clear topcoat.
Even a great floor dulls with time. Traffic scuffs the gloss, wheels leave marks and years of cleaning wear the top layer. If the coating beneath is sound, a refresh can bring the shine back without a full redo. We clean the floor, lightly abrade the surface, repair chips and apply a new clear topcoat. Nashville garages with big windows and heavy use often benefit most, because sun and traffic age the top layer first.
We start by checking the bond of the existing coating and looking for chips, peeling or yellowing. If the coating is sound, we deep clean and degrease it, scuff the surface with a screening pad or fine abrasive and apply a new clear coat, with fresh flake only if needed. If we find failing areas, we repair them or remove and rebuild them before the refresh. We are honest about what a refresh can do: it restores gloss and protection, but it does not hide cracks or fix a floor that is peeling because of moisture.
We test that the old coating is holding.
Grease and film are removed before coating.
A new topcoat restores gloss and protection.
A refresh cannot cure a failing, moist floor.
We test that the old coating is holding.
Grease and film are removed before coating.
A screen or fine abrasive helps the new coat bond.
A new topcoat restores gloss and protection.
Chips and failing areas are fixed before the refresh.
A refresh cannot cure a failing, moist floor.
Every topic has its own page with what to expect and how we approach it.
Comparison guideUV Stability and YellowingWhy some coatings turn amber in sunlight, how polyaspartic topcoats resist it and what to expect near open…Learn more 
Comparison guideCleaning and CareThe tools, cleaners and routines that keep a coated garage floor bright, including what to avoid.Learn more 
Comparison guideLayers and ThicknessHow primer, basecoat, flake and topcoat layers add up to a floor system, and why thickness and layer…Learn more Tick what you notice about your slab, from cracks and stains to moisture and old coatings, to see what to check and fix before a consultation.
You tell us what you want to coat, how you use the space and what bothers you about the floor, and we set a visit.
We measure the floor, check cracks, stains and moisture, take photos and talk through colors and finishes.
You review samples, a design preview and a plain written scope with every layer and the schedule before anything is ordered.
We clear and protect the space, diamond grind the slab, repair cracks and joints and clean the surface.
We apply the basecoat, broadcast flakes or color and roll the clear topcoat, then give you a cure schedule.
We walk the finished floor with you, share a care guide and schedule a first checkup.
It depends on use and care. Many floors never need one, while busy floors may after several years.
Sound coatings can. Peeling or moist floors need more work.
A clear refresh keeps the color. A new color needs a new base or flake layer.
Usually less than a full install. We give a schedule.
A refresh generally takes less prep than a full recoat, and we explain which fits your floor.
Epoxy-to-Polyaspartic RecoatEpoxy-to-polyaspartic recoat service that removes failing coatings or scuffs sound ones, then renews the floor with a UV-stable…Explore 
Coating Repair and Spot PatchingCoating repair and spot patching that fixes chips, gouges, impact marks and small failures in a coated floor…Explore 
Floor Care Plans and Yearly CheckupsFloor care plans and yearly checkups that wash, inspect and touch up a coated floor on a regular…Explore 
Seasonal Floor Care and Salt ProtectionSeasonal floor care and salt protection that explains how to handle winter salt, spring pollen, summer humidity and…Explore Tell us about your floor and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
